Zoom for Live Lectures

Beginning in April of 2018, the UNC Cancer Network replaced WebEx and GoToWebinar with Zoom for all live lectures. Please see details, below, on how this change will impact all viewing of live oncology telehealth lectures.

Zoom

 

The UNC Cancer Network is now using Zoom for all Telehealth Lectures. What this means for you depends on how you typically connect to our lectures. Up until the end of March of 2018, we had four ways that users could connect to our live lectures. Below, we outline what changes, if any, you will need to make to view our live lectures.

Mediasite

For those viewing our lectures in Mediasite, everything will remain the same. There are no changes required, from the user perspective. That said, I do have two improvements to announce:

    • You may now view ANY live UNCCN lecture by simply going to www.unccn.org/live. This link will always take you to the most current live lecture. 
    • We now have an improved look for our Mediasite player. Now, when you view lectures in Mediasite, you will always see both the video and the slides in a new and improved format.

 Please remember that viewing in Mediasite does not allow you to receive continuing education credit, unless you are doing so because we have indicated that this is acceptable due to a singular technical failure of another system.

Video Conferencing Systems/Codecs (Cisco/Tandberg/Polycom)

For those of you connecting with a video conferencing system, your system has already been tested by our AV engineer. On the day of the lecture, your system will automatically be invited into the lecture, approximately 30 minutes before the lecture start time. For most of you, you will simply need your site coordinator to make sure that your system in on, 30 minutes before the lecture.  Please note that for just a few sites, there are network issues that prevent you from being invited. If this is the case, OR in the unlikely event that your lecture does not connect, please use your system remote or touch panel on your video conferencing system to dial into the lecture at the SIP URI provided on the lecture instructions (looks like: 111111111@zoomcrc.com - the actual number will be provided for the event). In the event that your system has not connected and it is 25 or fewer minutes before the lecture, please call us at 919-445-1000 for assistance. In the event that we are not able to assist, please connect to the lecture with a web browser in Mediasite at: www.unccn.org/live, or using the directions below for Zoom.

 GoToWebinar or WebEx – Replaced by Zoom Webinar

 About Zoom

We no longer support WebEx or GoToWebinar. These two services have now been replaced with Zoom Webinar. To join, you will first need to register for the event. Please remember that if you are going to receive continuing education credit for the lecture, you must attend via Zoom or in a group setting with site coordinator. This is the same as it has been in the past, with Zoom now replacing GoToWebinar and WebEx. 

 Installing and Testing Zoom

Zoom works on just about any device, including PC or Mac, as well as Zoom Mobile Apps for iPhone, Android, etc. To test if Zoom has been installed and is working properly, we strongly recommend that you go to: https://zoom.us/test. If this link opens Zoom, you are ready to join a lecture. If not, follow the download directions to download Zoom on the test page (or go tohttps://zoom.us/download), and try https://zoom.us/test again, once Zoom has been installed. Please note that a Zoom account (Zoom username and login) is not required to join UNCCN lectures. If you have one, that is fine, but you are not required to have a free or purchased account; only the downloaded application.

Registering for a Zoom Lecture

When using Zoom, we strongly recommend that you register ahead of time for the lecture. This is required for credit, unless you are with a coordinator. You can do so by going to www.unccn.org/events. Please find the event that you wish to attend and click on the link with the title. This will direct you to a page with event details, including a friendly, orange button indicating “Register to Attend via Zoom Webinar.” Clicking on this button will take you to a link where you may register for the event. After you have registered, you will receive an email with a link to “Join from a PC, Mac, iPad, iPhone, or Android Device.” The link is a long URL beginning with: https://unccn.zoom.us… followed by a long string of letters and numbers. This is the link you will select when you are ready to join the lecture. We suggest joining at least 10 minutes before the event, to ensure that everything is working properly. Please note that the link you receive in the email is personalized to you. Please do not share this link with others, as the link is unique, and it may only be used with a single device. Also, you will need to register separately for each lecture.  

In the event that you decide to register for a lecture after it has actually begun, you should be automatically linked to the lecture as soon as you register. Just remember that in order to receive credit for live, for-credit lectures, you must attend at least 50 minutes of the lecture (tracked in Zoom).  

Configuring Audio with Zoom

When you join a lecture, you will need to select “Join Audio” in order to hear the lecture. We strongly recommend that you watch the following video prior to your first Zoom lecture, to ensure that you understand how to hear the lecture: https://support.zoom.us/hc/en-us/articles/201362283-How-Do-I-Join-or-Test-My-Computer-Device-Audio-

 Support for Zoom

In the event that you have additional questions, a robust Zoom support page is available at: https://support.zoom.us. This includes several Zoom tutorials that may be helpful. In the event that you still need assistance with Zoom after looking at the Zoom support page, please don’t hesitate to contact us at 919-445-1000 or unccn@unc.edu.